HSE 300 is the latest solution for spraying in a greenhouse. The machine has two spraying bars up to 3m high, one spraying the end of the row, the other spraying the plants on both sides. Both are equipped with nozzle heads that can be adjusted and individual setting of the spray liquid stream. "The device moves on a suitable track with heating pipes in the greenhouse and is equipped with a 300L tank," the team with FHPU Maryniaczyk, developers of the machine, shows.
"The entire device is controlled by a PLC controller, which allows you to set the route, speed, turn on the appropriate spray bar while driving, control over the battery charge status informing about upcoming discharge and counts the number of hours worked," they add. "Working with the HSE 300 is easy and intuitive. We program the length of the sprayer’s travel and the amount of liquid, and allow it to automatically run on the heating pipes and spray the plants."
The sprayer calculates the liquid flow and with the set parameters, it calculates the pressure which has to be applied (in accordance to used nozzles and the required amount of solution to be sprayed per Ha)
A special wheels system under the device and a steering system on the back of the HSE 300 enable the trouble-free change of rows without the use of any force. Near the control panel you will find a special switch that allows you to control the speed of the device in manual mode during row changes.
Application of big batteries, easily exchangeable cassette and charging station(equipped with additional set of batteries) allow to use sprayer 24h/7days. Changing the cassette with batteries for the one which is on the charging station takes 30 seconds.
Technical data:
· Length: 2253 mm
· Width: 871mm
· Height: 2098 mm
· Weight: 570 kg
· Tank capacity: 300L
· Four electric motors with power of 0.5 kW
· Maximum pressure 25 bar
· Maximum output 30 l/min
· Travel speed 0-85 m/min
For more information: